Brass Dial Longcase Clocks

Ok so youve got a grandfather clock and you want to know roughly how old it is. Here are some basic paramaters to allow you to see the date ranges of the various features so you can get an idea without doing a whole load of reasearch on makers and suchlike. The first Grandfathers produced in London because Christian Huegens invented the pedulum clock. Before this clocks were…well they sucked really as timekeepers. If a clock lost 5 minutes a day it was doing well but with the pendulum clock you could get it down to 5 minutes a week. The pendulum clock was therefore a very useful thing but of course you needed a long case to cover the long pendulum the longer the more accurate and the Grandfather or Longcase clock was born. The square dial persisted until by which time it was going out of fashion ans was completely replaced by the arched dial with exceptions of course by All faces were brass up until when the painted dial came along.

Antique Longcase Clocks

Contact Us. Parkside House Antiques specializes in clocks of American, English, French and Scottish origin with an emphasis on tall case clocks. All of our clocks run fine and many are original clock-maker signed and dated.

A 19th century oak and mahogany long-case clock, the dial marked Jno Spurrier, Tewkesbury, with date aperture; the case with brass eagle and ball.

Our antique clocks have been serviced by our expert clock makers and are fully functioning. We ship and install antique clocks anywhere in the United States. Demystify antique clock collecting by visiting our resources for early American clock styles , antique clock terms , and a list of early American clockmakers. View our inventory of antique clocks. Our antique furniture is truly heirloom quality. We ship and install antique furniture anywhere in the United States.

View our inventory of early American furniture. Our antique accessories are truly unique. We ship and install antique accessories anywhere in the United States. View our inventory of antique accessories. Antique Clocks Our antique clocks have been serviced by our expert clock makers and are fully functioning. Hood or Bonnet – houses movement. Fluted Hood Columns – decorative element.

Grandfather Clocks

Olive ash burl corner overlays frame the crystal-cut oval glass on the lower door, allowing a view of the pendulum and weights. The polished brass-finished dial offers elaborate corner spandrels, a center disk, a silver chapter ring with applied brass Arabic numerals, and an astrological moon phase dial. The polished brass-finished pendulum includes a center disk that complements the dial and coordinates with the banded, polished-brass weight shells.

Elaborately carved, reeded columns with turned top and bottom caps and carved oval appliques enhance the front view of the clock. The multitiered base features a decorative cutout. Removable beveled glass top side panels allow easy access to the movement.

A fine, small, 8 day oak longcase clock. Brass dial, with chapter ring and ‘Urn’ spandrels, date aperture, subsidiary seconds dial original blued steel hands.

C grandfather clock clock repair repair clock. An English lantern clock, made in London around Short 10″ pendulum and verge escapement. Because of the short pendulum it could stand on a table, but the timekeeping was poor. Another Lantern clock, C, with the “new” long pendulum and anchor escapement this clock had to be hung on the wall to run. Often known as “hoop and spike” clocks because of the iron hoop to hang the clock from, and the spikes at the bottom to dig in the wall and keep the clock steady.

From now on the timekeeping of clocks improved by a huge amount using the longer pendulum and “anchor” escapement. Around the same period, with a slightly larger dial and a wooden hood to keep the dust out of the clock movement. Still the same lantern clock movement inside, but without the expensive brass body.

Longcase Clocks

LAurel Bank Antiques of York sell antique grandfather clocks and a range of other desirable clocks and antiques. We also repair, clean and refurbish clocks and antiques. Clock Trade Sign for auction. Face marked “Max J.

Oct 4, – A walnut longcase clock, early 18th century, the 12in arched brass dial inscibed ‘Benj. Stretch, Bristol’, with strike/silent dial in arch, subsidiary date.

The origins of the longcase clock are somewhat confused but it seems that they originated from the lantern clock. This type of clock had evolved from having a balance wheel escapement to the anchor escapement with a long pendulum and weights hanging underneath. When the anchor escapement was invented it was found to be a much better time keeper but due to the longer pendulum being exposed to the elements the idea of enclosing the movement, weights and pendulum inside a wooden case was thought of.

Almost all of these early clocks were of 30 hour duration but the 8 day and month duration longcase clocks followed very closely. There were even some made that were of year duration. A number of longcase clocks by these makers are in the Royal collection. The first designs were very basic and were made for a purpose and not to be decorative in any way.

Antique Clocks & Barometers from a Leading UK Dealer – Antique Longcase Clock Specialist

Year of origin Country of origin: England. Signed : Tho. Lister Halifax.

The clock has an eight day striking movement, a brass dial with a secondary second dial and a date aperture. The clock has the maker’s name ‘Johnathan Beith’.

All of these clocks are Longcase Clocks. Originally starting as a wall clock, the trunk soon developed to hide the weights traveling down the wall. Early examples were much smaller and narrower. As the movements became sophisticated and heavier, they needed to be supported by the case, not just the dial. In addition, as the pendulum developed from a foliot, to a short pendulum, then to the seconds pendulum, the width and length of the case increased to accommodate the longer pendulum and wider arc of swing.

Continued study and development by English horologists resulted in a dependable and highly accurate clock mechanism and form. To own one of their clocks is to own the work of a scientist, engineer and artist. Their clocks are a moment in the history of the science of timekeeping. These men and others worked in the large and royal cities, close to their financial supporters and close to the fine cabinetmakers of their day. Fine quality timepieces came from the cities and had an elegance of design, proportion, size, line, and detail that the country clockmakers would copy.

The Longcase Clock is capable of many functions. It may be musical and or chime at the quarter hours. There may be a moon phase crossing in the arch of the dial, showing the age of the moon. Delightfully, there may be a rocking ship, Eve offering Adam an apple or children on a seesaw.

All about clocks

Grandfather clocks, also called longcase clocks by horologists, were invented after Dutchman Christiaan Huygens applied a pendulum as a clock-winding device in But it wasn’t until about when clockmakers mastered the workings of the pendulum for accurate timekeeping in conjunction with an anchor escapement — the mechanical device that gives a pendulum its swing.

If you own a longcase clock, determining its age can tell you how much it is worth.

dials were often fifteen dial wide and the clocks clocks eight feet tall, sometimes nine feet or more. Given the larger area of dial to.

Two weights, one pendulum, one movement, one trunk and one hood. To begin with you will need to decide where the clock will be situated. This can obviously be anywhere in your house but you will need to be careful when placing them near radiators or other sources of heat due to the possibility of damage to the case. Screwdriver, screws for fixing the movement to the seatboard, screws for fixing the trunk to the wall if required , drill, block for wall if required , masking tape and some small wooden blocks to level the trunk up against the wall.

Screwing them to the wall is firstly to keep the clock firm against the wall and secondly for security. If the clock is to be placed on a carpeted surface then the need for screwing the clock to the wall will be reduced as they tend to sit very well on a carpeted surface. If however the clock is to be placed on a wooden or stone floor then it will almost certainly need to be fixed to the wall.

The first job is to place the trunk of the clock against the wall. Using a level make sure the clock is straight. This is not absolutely necessary to make the clock work properly as the clock can be adjusted later in the set-up process but the clock must be straight to the eye. You may need to use the small wooden packs to level the clock under the front corners of the trunk.

Depending on the clock or floor you may need to use more packs on one side than the other.

Rare brass dial Grandmother clock